Bucket-teeth part list 20
bucket-teeth part list 20
| Item # | Item Name | Description | Wt. (lb.) |
| An excavator rubber track(J track) with a wide 2 inch sprocket inside guide width, this rubber | |||
| track is 15.75 inches wide and has 72 internal metal crossbars that are 2.85 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Case style 50, | |||
| 50Maxi, 50RTB, CK52; Caterpillar style 304, 304.5, MM40CR, MM40B, MM40T, MM45, MM45B, | 615.60 | ||
| MM45T, MM55SR, MM57SR, MX45, 305CR, 305SR; Hitachi style EX40, EX50, 50U; John Deere | |||
| style 50ZTS; Kobelco style Z16; Kubota style KH040, KX040, KX161-2, K040, K045, K151, | |||
| KH045, KH130, KH151, KX045, KX151.2, U45, U56G; New Holland style BC45, EC45, EC45SR; | |||
| 400-72.5W-72 | EXCAVATOR RUBBER TRACK | Takeuchi style TB55R, TB55UR; Terex style TC48, TC50. | |
| An excavator rubber track(R track) with a narrow 1 inch sprocket inside guide width, this rubber | |||
| track is 11.81 inches wide and has 86 internal metal crossbars that are 2.07 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Hitachi style EX35, | 267.00 | ||
| EX35U, EX36U, EX40UR; John Deere style 35ZTS/D, 35D; Terex style TC37; Komatsu style | |||
| R300-52.5N-86 | EXCAVATOR RUBBER TRACK | PC30MRX. | |
| An excavator rubber track(R track) with a wide 2 inch sprocket inside guide width, this rubber | |||
| track is 15.75 inches wide and has 72 internal metal crossbars that are 2.85 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Case style 50, | |||
| 50Maxi, 50RTB, CK52; Caterpillar style 304, 304.5, MM40CR, MM40B, MM40T, MM45, MM45B, | 535.00 | ||
| MM45T, MM55SR, MM57SR, MX45, 305CR, 305SR; Hitachi style EX40, EX50, 50U; John Deere | |||
| style 50ZTS; Kobelco style Z16; Kubota style KH040, KX040, KX161-2, K040, K045, K151, | |||
| KH045, KH130, KH151, KX045, KX151.2, U45, U56G; New Holland style BC45, EC45, EC45SR; | |||
| R400-72.5W-72 | EXCAVATOR RUBBER TRACK | Takeuchi style TB55R, TB55UR; Terex style TC48, TC50. | |
| Vermeer Rubber Tracks | |||
| An excavator rubber track(J track) that is 9.06 inches wide and has 54 internal metal crossbars | |||
| that are 2.84 inches apart when measured from center to center. This rubber track will fit the | |||
| 230-72-54 | RUBBER TRACK | following models; Vermeer style D7x11, D10x15, D16x20. | 120.40 |
| Volvo Rubber Tracks | |||
| An excavator rubber track(J track) with a wide 1 inch sprocket inside guide width, this rubber | |||
| track is 11.81 inches wide and has 78 internal metal crossbars that are 2.07 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Caterpillar style | 291.70 | ||
| 302.5; Kobelco style SK024, SK025, Z13, SK024.1, SK025.1, SK025.2, SK025SR, SK25SR; | |||
| 300-52.5W-78 | EXCAVATOR RUBBER TRACK | Mitsubishi style MM25; Takeuchi style TB025, TB125; Volvo style EC25, EC30. | |
| An excavator rubber track(J track) with a special bottom roller style tread pattern, this rubber track | |||
| is 15.75 inches wide and has 74 internal metal crossbars that are 2.85 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Bobcat style X337, | 692.60 | ||
| X341; Case style CK50; Daewoo style Solar 55, Solar 55V; JCB style 805, 805-2; Volvo style | |||
| 400-72.5R-74 | EXCAVATOR RUBBER TRACK | ECR58, EC55, EC55B; Kubota style KX161-2, KX161-3; Kobelco style E45SR. | |
| An excavator rubber track(J track) with a wide 2.25 inch sprocket inside guide width, this rubber | |||
| track is 15.75 inches wide and has 74 internal metal crossbars that are 2.85 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Bobcat style X337, | |||
| X341; Case style CK50, CK50 Maxi; JCB style 805, 805-2, 8052, 8060; Volvo style ECR 58, | 632.70 | ||
| EC55, EC55B; Kobelco style E45SR; Caterpillar style 304.5/CR, 305CR; Hitachi style EX58MU; | |||
| 400-72.5W-74 | EXCAVATOR RUBBER TRACK | John Deere style 50DD; New Holland style EH55; Kubota style KX161, U45-3, RX502/VA. | |
| An excavator rubber track(R track) with a wide 1 inch sprocket inside guide width, this rubber | |||
| track is 11.81 inches wide and has 78 internal metal crossbars that are 2.07 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Caterpillar style | 275.00 | ||
| 302.5; Kobelco style SK024, SK025, Z13, SK024.1, SK025.1, SK025.2, SK025SR, SK25SR; | |||
| R300-52.5W-78 | EXCAVATOR RUBBER TRACK | Mitsubishi style MM25; Takeuchi style TB025, TB125; Volvo style EC25, EC30. | |
| An excavator rubber track(R track) with a special bottom roller style tread pattern, this rubber | |||
| track is 15.75 inches wide and has 74 internal metal crossbars that are 2.85 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Bobcat style X337, | 685.00 | ||
| X341; Case style CK50; Daewoo style Solar 55, Solar 55V; JCB style 805, 805-2; Volvo style | |||
| R400-72.5R-74 | EXCAVATOR RUBBER TRACK | ECR58, EC55, EC55B; Kubota style KX161-2, KX161-3; Kobelco style E45SR. | |
| An excavator rubber track(R track) with a wide 2.25 inch sprocket inside guide width, this rubber | |||
| track is 15.75 inches wide and has 74 internal metal crossbars that are 2.85 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Bobcat style X337, | 550.00 | ||
| X341; Case style CK50, CK50 Maxi; JCB style 805, 805-2, 8052, 8060; Volvo style ECR 58, | |||
| EC55, EC55B; Kobelco style E45SR; Caterpillar style 304.5/CR, 305CR; Hitachi style EX58MU; | |||
| R400-72.5W-74 | EXCAVATOR RUBBER TRACK | John Deere style 50DD; New Holland style EH55; Kubota style KX161, U45-3, RX502/VA. | |
| Yanmar Rubber Tracks | |||
| An excavator rubber track(J track) that is 7.09 inches wide and has 37 internal metal crossbars | |||
| that are 2.84 inches apart when measured from center to center. This rubber track will fit the | 52.20 | ||
| following models; Hitachi style EX7, EX8; Kobelco style SK002, SK007, SK009; Komatsu style | |||
| 180-72-37 | EXCAVATOR RUBBER TRACK | PC03, PC09; Kubota style K007, K008; Takeuchi style TB007, TB108; Yanmar style B07, B08. | |
| An excavator rubber track(J track) that is 9.06 inches wide and has 39 internal metal crossbars | |||
| that are 2.84 inches apart when measured from center to center. This rubber track will fit the | 87.00 | ||
| 230-72-39 | EXCAVATOR RUBBER TRACK | following models; Ditch Witch style HT25, JT1200, JT2511; Yanmar style YB10R. | |
| An excavator rubber track(J track) that is 9.06 inches wide and has 47 internal metal crossbars | |||
| that are 2.84 inches apart when measured from center to center. This rubber track will fit the | 104.80 | ||
| 230-72-47 | EXCAVATOR RUBBER TRACK | following models; Yanmar style B17-2, B18EX, VIO15/2. | |
| An excavator rubber track(J track) with a narrow 1 inch sprocket inside guide width, this rubber | |||
| track is 11.81 inches wide and has 78 internal metal crossbars that are 2.07 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Hitachi style | 266.80 | ||
| EX20UR/UR3, EX25/1, EX27U/29U, EX12/1/2, EX15/1/2, EX15/U; John Deere style 27ZTS; | |||
| 300-52.5N-78 | EXCAVATOR RUBBER TRACK | Kobelco style SK25SR; Yanmar style B27-2. | |
| A rubber track(J track) with an offset tread pattern, this rubber track is 11.81 inches wide and has | |||
| EXCAVATOR OFFSET RUBBER | 78 internal metal crossbars that are 2.19 inches apart when measured from center to center. This | 316.70 | |
| 300-55.5-78 | TRACK | rubber track will fit the following models; Yanmar style B27, VI027, VI027.2.. | |
| 300-55.5-82 | OFFSET RUBBER TRACK | rubber track will fit the following models; Yanmar style VI035, VI030, B37V. | |
| An excavator rubber track(J track) that is 15.75 inches wide and has 46 internal metal crossbars | |||
| that are 4.21 inches apart when measured from center to center. This rubber track will fit the | 506.00 | ||
| 400-107-46 | EXCAVATOR RUBBER TRACK | following models; Komatsu style PC40FR-1; Yanmar style VIO40. | |
| An excavator rubber track(J track) with an offset tread pattern, this rubber track is 15.75 inches | |||
| wide and has 74 internal metal crossbars that are 2.97 inches apart when measured from center | 659.30 | ||
| EXCAVATOR OFFSET RUBBER | to center. This rubber track will fit the following models; Komatsu style PC40FR-2, FM40; Yanmar | ||
| 400-75.5-74 | TRACK | style VIO57, VIO-55, B50-2B, VIO50-2. | |
| An excavator rubber track(J track) with a 19/16 inch sprocket inside guide width, this rubber track | |||
| is 17.72 inches wide and has 76 internal metal crossbars that are 3.19 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Komatsu style | 788.00 | ||
| PC60-5, PC60-6, PC60-7, PC75-1, PC75-2, PC75-3, PC75UU, PC75UU-2, PC75UU-3; Yanmar | |||
| 450-81N-76 | EXCAVATOR RUBBER TRACK | style VI70, VI75. | |
| An excavator rubber track(J track) with a Komatsu style tread pattern, this rubber track is 17.72 | |||
| inches wide and has 74 internal metal crossbars that are 3.29 inches apart when measured from | 791.10 | ||
| center to center. This rubber track will fit the following models; Komatsu style PC60-5, PC60-6, | |||
| 450-83.5K-74 | EXCAVATOR RUBBER TRACK | PC60-7, PC75-1, PC75-2, PC75-3, PC75UU, PC75UU-2, PC75UU-3; Yanmar style VI70, VI75. | |
| An excavator rubber track(R track) with a narrow 1 inch sprocket inside guide width, this rubber | |||
| track is 11.81 inches wide and has 78 internal metal crossbars that are 2.07 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Hitachi style | 242.00 | ||
| EX20UR/UR3, EX25/1, EX27U/29U, EX12/1/2, EX15/1/2, EX15/U; John Deere style 27ZTS; | |||
| R300-52.5N-78 | EXCAVATOR RUBBER TRACK | Kobelco style SK25SR; Yanmar style B27-2. | |
| An excavator rubber track(R track) with a 19/16 inch sprocket inside guide width, this rubber track | |||
| is 17.72 inches wide and has 76 internal metal crossbars that are 3.19 inches apart when | |||
| measured from center to center. This rubber track will fit the following models; Komatsu style | 748.00 | ||
| PC60-5, PC60-6, PC60-7, PC75-1, PC75-2, PC75-3, PC75UU, PC75UU-2, PC75UU-3; Yanmar | |||
| R450-81N-76 | EXCAVATOR RUBBER TRACK | style VI70, VI75. | |
| Takeuchi Style Parts | |||
| Takeuchi Style Pins | |||
| 1914200023 | FLEX PIN | H&L style flex pin for a 230 series bucket tooth; Use Item #23FP | 0.09 |
| 1914200183 | PIN | Esco style pin, takes an 18-20LK lock; Use Item #18-20PN | 0.09 |
| Hensley style roll pin for a 156 series bucket tooth, this pin is 2" long and has a .375" pin | |||
| 1914210183 | ROLL PIN | diameter; Use Item #P156 | 0.04 |
| Takeuchi Style Retainers | |||
| 1914200183 | RUBBER LOCK | Esco style rubber lock, takes an 18-20PN pin; Use Item #18-20LK | 0.09 |
| Takeuchi Style Teeth | |||
| Esco style standard dirt bucket tooth for an 18 series, takes an 18-20PN pin and an 18-20LK lock; | |||
| 1914200182 | DIRT TOOTH | Use Item #18TL | 2.43 |
| 1914200230 | DIRT TOOTH | H&L style dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 | 2.98 |
| 1914210182 | DIRT TOOTH | Hensley style dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156 | 1.20 |
| 1914299142 | TWIN TIGER TOOTH | Hensley style twin tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156WT | 2.65 |
| Esco style standard dirt bucket tooth for an 18 series, takes an 18-20PN pin and an 18-20LK lock; | |||
| 2412P641E1 | DIRT TOOTH | Use Item #18TL | 2.43 |
| U111500002 | DIRT TOOTH | H&L style dirt bucket tooth, takes a 2AP flex pin; Use Item #2AC | 1.34 |
| Terex Style Parts | |||
| Terex Cutting Edges | |||
| Terex style bolt on center cutting edge. This is a double beveled reversible bucket cutting edge | |||
| 4198855 | CENTER EDGE | that is .75" thick, 10" wide and 91.25" in length | 180.78 |
| Terex style bolt on center cutting edge for a Terex Scraper. This is a double beveled reversible | |||
| 9252042 | CENTER EDGE | 61.30 | |
| Terex Style Pins | |||
| 9019777 | FLEX PIN | H&L style flex pin for a 270 series bucket tooth; Use Item # 27FP | 0.20 |
| 9211361 | FLEX PIN | H&L style flex pin for a 25 series bucket tooth; Use Item #25FP | 0.20 |
| 9243984 | FLEX PIN | H&L style flex pin for a 270 series bucket tooth; Use Item # 27FP | 0.20 |
| 9360562 | PIN | Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN | 0.20 |
| 15006895 | FLEX PIN | H&L style flex pin for a 230 series bucket tooth; Use Item # 23FP | 0.09 |
| 92113924 | FLEX PIN | Hensley style flex pin for a 200 series bucket tooth; Use Item # P162 | 0.20 |
| Terex Style Retainers | |||
| Esco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item #25- | |||
| 9360561 | RUBBER LOCK | 30LK | 0.02 |
| Terex Style Teeth | |||
| 9003922 | DIRT TOOTH | H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 | 7.06 |
| 9010794 | DIRT TOOTH | H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 | 7.06 |
| 9019778 | DIRT TOOTH | H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 | 8.16 |
| 9019779 | DIRT TOOTH | H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 | 8.16 |
| 9211362 | DIRT TOOTH | H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 | 7.06 |
| 9213933 | DIRT TOOTH | H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 | 4.19 |
| 9243922 | DIRT TOOTH | H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 | 7.06 |
| 9360560 | FLARE TOOTH | H&L style flare bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250F | 6.82 |
| 15006896 | DIRT TOOTH | H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 | 2.98 |
| Volvo Style Parts | |||
| Volvo Style Adapters | |||
| Esco style weld-on adapter for an 18 series bucket tooth with a 3/4" lip thickness; Use Item # | |||
| 1071-01850 | WELD ON ADAPTER | 1617-18 | 4.98 |
| Esco style weld-on adapter for a 35 series bucket tooth with a 1 1/2" lip thickness; Use Item # | |||
| 1071-02510 | WELD ON ADAPTER | 157B-35 | 21.61 |
| 11011112 | END EDGE | 95.00 | |
| Volvo style bolt on center cutting edge for a L90 Volvo Front End Loader. This is a double | |||
| 11011153 | CENTER EDGE | 226.00 | |
| Volvo style bolt on end cutting edge for a L90 Volvo Front End Loader. This is a double beveled | |||
| 11011154 | END EDGE | 115.00 | |
| Volvo style bolt on end cutting edge for a L70 Volvo Front End Loader. This is a double beveled | |||
| 11011413 | END EDGE | 58.10 | |
| Volvo style bolt on center cutting edge for a L60 Volvo Front End Loader. This is a double | |||
| 11012832 | CENTER EDGE | 136.00 | |
| Volvo style bolt on end cutting edge. This is a double bevel reversible bucket cutting edge that is | |||
| 11045808 | END EDGE | 1" thick, 18.1563" wide and 24.563" in length. | 118.61 |
| Volvo style bolt on center cutting edge. This is a double bevel reversible cutting edge that is 1" | |||
| 11045809 | CENTER EDGE | thick, 13.78" wide and 63.94" in length. | 233.00 |
| Volvo style bolt on center cutting edge for a L90 Volvo Front End Loader. This is a double | |||
| 11045948 | CENTER EDGE | 170.00 | |
| Volvo style bolt on center cutting edge for a L150 Volvo Loader. This is a double beveled | |||
| 11081065 | CENTER EDGE | 190.00 | |
| Volvo style bolt on end cutting edge for a L150 Volvo Loader. This is a double beveled reversible | |||
| 11081069 | END EDGE | 288.00 | |
| Volvo style end edge for a L180 Loader. This is a double beveled reversible end edge that is | |||
| 11082664-1 | END EDGE | 1.125" thick, 18.9" wide and 27.07" in length. | 151.00 |
| Volvo style center edge for a L180 Loader. This is a double beveled reversible center edge that is | |||
| 11082666-6 | CENTER EDGE | 1.125" thick, 14.96" wide and 71.57" in length. | 315.00 |
| Volvo style bolt on end edge for a L150 Volvo Front End Loader. This is a double beveled | |||
| 11111775 | END EDGE | 158.00 | |
| Volvo style bolt on center edge for a L150 Volvo Front End Loader. This is a double beveled | |||
| 11111776 | CENTER EDGE | 337.00 | |
| Volvo style bolt on end edge for a L150 Loader. This is a double beveled reversible end edge that | |||
| 11111885 | END EDGE | is 1.25" thick, 18.898" wide and 26.181" in length. | 150.00 |
| Volvo style bolt on center edge for a L150 loader. This is a double beveled center edge that is | |||
| 11111886 | CENTER EDGE | 1.25" thick, 14.96" wide and 66.22" in length. | 301.00 |
| Volvo style bolt on end cutting edge for a L70 Volvo Front End Loader. This is a double beveled | |||
| 11156579 | END EDGE | 60.00 | |
| Volvo style bolt on center cutting edge for a L70 Volvo Front End Loader. This is a double | |||
| 11156585 | CENTER EDGE | 114.00 | |
| Volvo style bolt on end cutting edge for a L110 Volvo Front End Loader. This is a double beveled | |||
| 11156765 | END EDGE | 143.00 | |
| Volvo style bolt on center cutting edge for a L110 Volvo Front End Loader. This is a double | |||
| 11156766 | CENTER EDGE | length. | 301.00 |
| Volvo Grader Blades | |||
| Caterpillar style 5/8" x 6" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" | |||
| 75439 | GRADER BLADE | (625x275) plow bolts and 15 - 5/8" (625 hex nut) hex nuts | 78.26 |
| Volvo Style Pins | |||
| 1502964 | PIN | Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN | 0.33 |
| 1502974 | PIN | Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item #40PN | 0.57 |
| 1504272 | PIN | Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN | 0.20 |
| 1528526 | PIN | Esco style pin, takes an 18-20LK lock, Use Item #18-20PN | 0.09 |
| 1542393 | PIN | Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN | 0.20 |
| 1545175 | PIN | Esco style pin for a 50 series bucket tooth, takes a 50LK lock; Use Item #50PN | 0.79 |
| 1801985 | RATCHET PIN | Esco style ratchet pin for a 45 series bucket tooth, takes a 45LKR ratchet lock; Use Item #45PNR | 0.70 |
| 1802026 | PIN | Esco style pin for a 56 series bucket tooth, takes a 56LK lock; Use Item #56PNP | 1.76 |
| 11079151 | PIN | Esco style V pin for a 27 series bucket tooth, takes a 27VPL plug; Use Item #27VPN | 0.44 |
| 12580973 | PIN | Esco style V pin for a 57 series bucket tooth, takes a 57VPL plug; Use Item #57VPN | 0.50 |
| 12580976 | PIN | Esco style V pin for a 47 series bucket tooth, takes a 47VPL plug; Use Item #47VPN | 0.66 |
| 1071-00660 | PIN | Caterpillar style pin for a J550 series bucket tooth, takes an 8E5559 retainer; Use Item #1U1558 | 1.10 |
| 1071-01860 | PIN | Esco style pin, takes an 18-20LK lock; Use Item # 18-20PN | 0.09 |
| 2520692 | RATCHET PIN | Esco style ratchet pin for a 50 series bucket tooth, takes a 50LKR ratchet lock; Use Item #50PNR | 0.80 |
| 3677327 | PIN | Esco style pin for a 55 series bucket tooth, takes a 55LK lock; Use Item #55PN | 0.99 |
| 8240-01400 | FLEX PIN | H&L style flex pin for a 230 series bucket tooth; Use Item # 23FP | 0.09 |
| 961881 | RATCHET PIN | Esco style ratchet pin for a 40 series bucket tooth, takes a 40LKR ratchet lock; Use Item #40PNR | 0.26 |
| Volvo Style Retainers | |||
| 1071-01870 | RUBBER LOCK | Esco style lock, takes an 18-20PN pin; Use Item # 18-20LK | 0.02 |
| 11079152 | PLUG | Esco style V plug for a 27 series bucket tooth, takes a 27VPN pin; Use Item #27VPL | 0.11 |
| 12580974 | PLUG | Esco style V plug for a 57 series bucket tooth, takes a 57VPN pin; Use Item #57VPL | 0.19 |
| 12580975 | PLUG | Esco style V plug for a 47 series bucket tooth, takes a 47VPN pin; Use Item #47VPL | 1.00 |
| 1502965 | RUBBER LOCK | Esco style rubber lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK | 0.11 |
| 1502973 | RUBBER LOCK | Esco style rubber lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK | 0.11 |
| Esco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item #25- | |||
| 1504271 | RUBBER LOCK | 30LK | 0.02 |
| 1528524 | RUBBER LOCK | Esco style rubber lock, takes an 18-20PN pin; Use Item #18-20LK | 0.02 |
| Esco style rubber lock for a 25 and a 30 series bucket tooth; takes a 25-30PN pin; Use Item #25- | |||
| 1542394 | RUBBER LOCK | 30LK | 0.02 |
| 1545176 | RUBBER LOCK | Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK | 0.44 |
| 1801986 | RATCHET LOCK | Esco style ratchet lock for a 45 series bucket tooth, takes a 45PNR ratchet pin; Use Item #45LKR | 0.11 |
| 1802027 | RUBBER LOCK | Esco style rubber lock for a 56 series bucket tooth, takes a 56PNP pin; Use Item #56LK | 0.90 |
| 1802376 | LOCK | Esco style horseshoe lock for a 21 series bucket tooth; Use Item #21LK | 0.33 |
| 1802383 | LOCK | Esco style horseshoe lock for a 27 series bucket tooth; Use Item #27LK | 0.40 |
| 1802390 | LOCK | Esco style horseshoe lock for a 37 series bucket tooth; Use Item #37LK | 0.70 |
| 1802401 | LOCK | Esco style horseshoe lock for a 47 series bucket tooth; Use Item #47LK | 0.79 |
| Esco style rubber ratchet lock for a 50 series bucket tooth, takes a 50PNR ratchet pin; Use Item | |||
| 2520693 | RATCHET LOCK | #50LKR | 0.15 |
| 2551626 | LOCK | Esco style horseshoe lock for a 57 series bucket tooth; Use Item #57LK | 0.90 |
| 3677444 | RUBBER LOCK | Esco style rubber lock for a 55 series bucket tooth, takes a 55PN pin; Use Item #55LK | 0.50 |
| Esco style ratchet lock for a 35 and a 40 series bucket tooth, takes a 40PNR pin; Use Item #35- | |||
| 961882 | RATCHET LOCK | 40LKR | 0.11 |
| Volvo Style Segments | |||
| Volvo style segment for a L150 Loader. This is a segment that is 1.125" thick, 15" wide and 13" | |||
| 11111761 | SEGMENT | long. | 58.00 |
| Volvo Style Teeth | |||
| Caterpillar style standard, dirt bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 | |||
| 1071-00460 | DIRT TOOTH | sleeved retainer; Use Item # 1U3352 | 13.16 |
| Esco style conical, standard, dirt bucket tooth for a 35 series; takes a 35PN pin and a 35-40LK | |||
| 1071-02520 | DIRT TOOTH | lock; Use Item # 35S | 9.26 |
| Esco style conical, standard dirt bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK | |||
| 1071-02590 | DIRT TOOTH | lock; Use Item # 30S | 5.95 |
| Esco style abrasion bucket tooth for a 47 series, takes a 47VPN pin and a 47VPL plug; Use Item | |||
| 12566084 | ABRASION TOOTH | #47ARLB | 43.00 |
| Esco style standard dirt bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin | |||
| 12567136 | DIRT TOOTH | and a 47VPL plug; Use Item #47SYL | 23.81 |
| Esco style standard, conical dirt bucket tooth for a 30 series, takes a 25-30LK lock and a 25- | |||
| 1542261 | DIRT TOOTH | 30PN pin; Use Item #30S | 5.95 |
| Esco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use | |||
| 1542262 | ROCK CHISEL TOOTH | Item #40RDX | 14.68 |
| Esco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use | |||
| 1542264 | DIRT TOOTH | Item #40S | 15.65 |
| Esco style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item | |||
| 1542266 | DIRT TOOTH | #45S | 20.50 |
| Esco style rock chisel bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item | |||
| 1545174 | ROCK CHISEL TOOTH | #50R | 23.15 |
| Esco style standard dirt bucket tooth for a 21 series, takes a 21LK horseshoe lock; Use Item | |||
| 1802374 | DIRT TOOTH | #21SYL | 7.06 |
| 1802375 | ROCK TOOTH | Esco style rock bucket tooth for a 21 series, takes a 21LK horseshoe lock; Use Item #21TG | 6.50 |
| 1802397 | ROCK TOOTH | Esco style rock bucket tooth for a 47 series, takes a 47LK horseshoe lock; Use Item #47R | 23.00 |
| Esco style abrasion bucket tooth for a 47 series, takes a 47LK horseshoe lock; Use Item | |||
| 1802400 | ABRASION TOOTH | #47ARLB | 43.00 |
| 1804010 | ROCK TOOTH | Esco style rock bucket tooth for a 47 series, takes a 47LK horseshoe lock; Use Item #47LP | 19.00 |
| 1805081 | ROCK TOOTH | Esco style rock bucket tooth for a 21 series, takes a 21LK horseshoe lock; Use Item #21TG | 6.50 |
| 2516568 | ROCK TOOTH | Esco style rock bucket tooth for a 55 series, takes a 55PN pin and a 55LK lock; Use Item #55LP | 37.50 |
| Esco style SYL dirt bucket tooth for a 37 series, takes a 37LK horseshoe lock or a 37VPN pin and | |||
| 2561686 | DIRT TOOTH | a 37VPL plug; Use Item #37SYL | 15.87 |
| Esco style SYL dirt bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin and | |||
| 2562141 | DIRT TOOTH | a 27VPL plug; Use Item #27SYL | 9.26 |
| Esco style tiger bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin and a | |||
| 2562273 | TIGER TOOTH | 27VPL plug; Use Item #27VIP | 9.47 |
| 8240-01410 | DIRT TOOTH | H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 | 2.98 |
| Wear Bars | |||
| Wear Bars | |||
| Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 153mm (6") in length, 38mm (1 1/2") in width and | |||
| B107 | WEAR BAR | 33mm (1 1/4") in height; same as DLP295 | 3.31 |
| Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 210mm (8 1/4") in length, 50mm (2") in width and | |||
| B202 | WEAR BAR | 50mm (2") in height; same as DLP369 | 9.04 |
| Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 150mm (5.91") in length, 75mm (2.95") in width and | |||
| DLP184 | WEAR BAR | 39mm (1.53") in height | 7.49 |
| Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 153mm (6") in length, 38mm (1 1/2") in width and | |||
| DLP295 | WEAR BAR | 33mm (1 1/4") in height; same as B107 | 3.31 |
| Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 210mm (8 1/4") in length, 50mm (2") in width and | |||
| DLP369 | WEAR BAR | 50mm (2") in height; same as B202 | 9.04 |
| Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 154 mm (6.06") in length, 101 mm (3.98") in width, | |||
| SB409 | WEAR BAR | and 34 mm (1.34") in height | 8.16 |
| Wear Buttons | |||
| Wear Buttons | |||
| 115mm (4 1/2" diameter) wear button, 700 brunell high chromium white iron with a weldable mild | |||
| WB115 | WEAR BUTTON | steel backing plate | 4.80 |
| 150mm (5 7/8" diameter) wear button, 700 brunell high chromium white iron with a weldable mild | |||
| WB150 | WEAR BUTTON | steel backing plate | 10.60 |
| WB60 | WEAR BUTTON | steel backing plate | 1.00 |
| 75mm (2 3/4" diameter) wear button, 700 brunell high chromium white iron with a weldable mild | |||
| WB75 | WEAR BUTTON | steel backing plate | 2.00 |
| 90mm (3 1/2" diameter) wear button, 700 brunell high chromium white iron with a weldable mild | |||
| WB90 | WEAR BUTTON | steel backing plate | 2.60 |
| 90mm (3 1/2" diameter) wear button, 700 brunell high chromium white iron with a weldable mild | |||
| steel backing plate, this wear button is 1.75" tall, 1.36" thick of white iron and .39" thick of the | |||
| WB90HD | WEAR BUTTON | mild steel backing plate | 4.63 |
| Wear Donuts | |||
| Wear Donuts | |||
| Wear Donut is a combination of high chromium(700 Brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 25mm(1") in height, 100mm(3.9") in diameter, and | |||
| DLP1921 | WEAR DONUT | 50mm(2") is the inside hole diameter. | 2.21 |
| Wear Donut is a combination of high chromium(700 Brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 32mm(1.25") in height, 100mm(3.9") in diameter, | |||
| DLP1994 | WEAR DONUT | and 70mm(2.75") is the inside hole diameter. | 2.21 |
| Wear Donut is a combination of high chromium(700 Brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 23mm(.9") in height, 130mm(5.1") in diameter, and | |||
| DLP2196 | WEAR DONUT | 80mm(3.14") is the inside hole diameter. | 2.87 |
| Wear Plates | |||
| Wear Plates | |||
| Wear plate is a combination of high chromium (700 brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 200mm (8") in length, 200mm (8") in width, with an | |||
| MP2218 | WEAR PLATE | 18mm (3/4") thickness, 12mm on 6mm backing plate. | 12.57 |
| Wear plate is a combination of high chromium (700 brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 200mm (8") in length, 200mm (8") in width, with a | |||
| MP2220 | WEAR PLATE | 20mm (7/8") thickness, 10mm on 10mm backing plate. | 13.89 |
| Wear plate is a combination of high chromium (700 brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 300mm (11 3/4") in length, 300mm (11 3/4") in width, | |||
| MP3318 | WEAR PLATE | with an 18mm (3/4") thickness, 12mm on 6mm backing plate | 28.00 |
| Wear plate is a combination of high chromium (700 brunell) white iron bonded to a mild steel | |||
| weldable backing plate. The dimensions are 300mm (11 3/4") in length, 300mm (11 3/4") in width, | |||
| MP3320 | WEAR PLATE | with a 20mm (7/8") thickness, 10mm on 10mm backing plate | 31.15 |
| Yanmar Style Parts | |||
| Yanmar Style Pins | |||
| 172448-82580-1 | PIN | Esco style pin, takes an 18-20LK lock; Use Item # 18-20PN | 0.09 |
| Yanmar Style Retainers | |||
| 172488-82590-1 | RUBBER LOCK | Esco style lock, takes an 18-20PN pin; Use Item # 18-20LK | 0.02 |
| Yanmar Style Teeth | |||
| Esco style standard dirt bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin; | |||
| 172448-82570-1 | DIRT TOOTH | Use Item # 18TL | 2.43 |
| Yanmar/Komatsu style unitooth with a .59" lip thickness and a 1.77" bolt hole spacing, center to | |||
| SX211 | UNITOOTH | center; takes 2 - 625x225 plow bolts and 2 - 625 hex nuts; Use Item #Y211 | 3.30 |
| Komatsu/Yanmar style unitooth with a .59" lip thickness and a 1.77" bolt hole spacing, center to | |||
| Y15 | UNITOOTH | center; takes 2 - 625x225 plow bolts and 2 - 625 hex nuts; Use Item # Y211 | 3.30 |
| Y211 | UNITOOTH | Yanmar/Komatsu style unitooth, takes 2 - 625x225 plow bolts and 2 - 625 hex nuts | 3.30 |
| Yanmar/Komatsu style unitooth with a .83" lip thickness and a 1.76" bolt hole spacing, center to | |||
| Y22 | UNITOOTH | center; takes 2 - 625x225 plow bolts and 2 - 625 hex nuts | 4.18 |
| Komatsu/Yanmar style unitooth with a .67" lip thickness and a 2.36" bolt hole spacing, center to | |||
| Y28 | UNITOOTH | center; takes 2 - 625x225 plow bolts and 2 - 625 hex nuts; Use Item # 20T-70-13130 | 5.38 |
Explore Our Products Across Various Industries
Metal and Waste Shredders
