Bucket-teeth part list 7
bucket-teeth part list 7
| Item # | Item Name | Description | Wt. (lb.) |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 2C2302 | HOT CUPPED END BIT LH | bit that is 2" thick, 16" wide and 24" in length. | 155.00 |
| Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped | |||
| 2C2328 | HOT CUPPED END BIT RH | right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. | 36.00 |
| 2C2384 | LH END BIT | Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844LH | 74.96 |
| 2C2385 | RH END BIT | Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843RH | 74.96 |
| 2J2571 | RH END BIT | Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843 | 74.96 |
| 2J2572 | LH END BIT | Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844 | 74.96 |
| Caterpillar style bolt on right hand or left hand grader end bits for a 112 Caterpillar Grader. This is | |||
| 3B4757 | GRADER END BIT | a grader end bit that is .625" thick, 6" wide and 18.375" in length. | 16.75 |
| Caterpillar style bolt on end bit for a D4 or a D5 Caterpillar Bulldozer. This is a level cut right | |||
| 3G4285 | LEVEL CUT END BIT RH OR LH | hand or left hand end bit that is .75" thick, 8" wide and 16.75" in length. | 26.46 |
| Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1.375" | |||
| 3G6395 | END BIT RH OR LH | thick, 8" wide and 20.25" in length. | 56.44 |
| Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1" thick, | |||
| 3G6993 | END BIT RH OR LH | 6.25" wide and 13.5625" in length. | 22.05 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8277 | HOT CUPPED END BIT RH | end bit that is 1.625" thick, 13" wide and 22" in length. | 97.99 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8278 | HOT CUPPED END BIT LH | bit that is 1.625" thick, 13" wide and 22" in length. | 97.99 |
| Caterpillar style bolt on right hand end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right | |||
| 3G8279 | HOT CUPPED RH END BIT | 98.00 | |
| Caterpillar style bolt on left hand end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left | |||
| 3G8280 | HOT CUPPED LH END BIT | 98.00 | |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8281 | HOT CUPPED END BIT RH | end bit that is 1.625" thick, 16" wide and 27.5" in length. | 153.00 |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8282 | HOT CUPPED END BIT LH | bit that is 1.625" thick, 16" wide and 27.5" in length. | 153.00 |
| Caterpillar style right hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 | |||
| 3G8283 | RH END BIT | plow bolts and 9 - 100 hex nuts; Use Item # 8E4197 | 155.00 |
| Caterpillar style left hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 | |||
| 3G8284 | LH END BIT | plow bolts and 9 - 100 hex nuts; Use Item # 8E4196 | 155.00 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8285 | HOT CUPPED END BIT RH | end bit that is 1.625" thick, 13" wide and 21.625" in length. | 105.01 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8286 | HOT CUPPED END BIT LH | bit that is 1.625" thick, 13" wide and 21.625" in length. | 105.01 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8287 | HOT CUPPED END BIT RH | end bit that is 1.625" thick, 13" wide and 22" in length. | 105.01 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8288 | HOT CUPPED END BIT LH | bit that is 1.625" thick, 13" wide and 22" in length. | 105.01 |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8289 | HOT CUPPED END BIT RH | end bit that is 1.375" thick, 16" wide and 27.5" in length. | 128.00 |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8290 | HOT CUPPED END BIT LH | bit that is 1.375" thick, 16" wide and 27.5" in length. | 128.00 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8291 | HOT CUPPED END BIT RH | end bit that is 1.375" thick, 15.5" wide and 24" in length. | 103.99 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8292 | HOT CUPPED END BIT LH | bit that is 1.375" thick, 15.5" wide and 24" in length. | 103.99 |
| Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 3G8293 | HOT CUPPED END BIT RH | bit that is .875" thick, 13.125" wide and 21.625" in length. | 66.14 |
| Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 3G8294 | HOT CUPPED END BIT LH | bit that is .875" thick, 13.125" wide and 21.625" in length. | 66.14 |
| Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped | |||
| 3G8295 | HOT CUPPED END BIT RH | right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. | 36.00 |
| Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left | |||
| 3G8296 | HOT CUPPED END BIT LH | hand end bit that is 1" thick, 10.3" wide and 15.44" in length. | 36.00 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 3G8297 | HOT CUPPED END BIT RH | bit that is 1" thick, 10.375" wide and 15.75" in length. | 38.58 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 3G8298 | HOT CUPPED END BIT LH | bit that is 1" thick, 10.375" wide and 15.75" in length. | 38.58 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8299 | HOT CUPPED END BIT RH | end bit that is 1.25" thick, 13" wide and 21.625" in length. | 75.99 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8300 | HOT CUPPED END BIT LH | bit that is 1.25" thick, 13" wide and 21.625" in length. | 75.99 |
| Caterpillar style right hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - | |||
| 3G8301 | RH END BIT | 100x400 plow bolts and 9 - 100 hex nuts | 57.54 |
| Caterpillar style left hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - 100x400 | |||
| 3G8302 | LH END BIT | plow bolts and 9 - 100 hex nuts | 57.54 |
| Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 3G8315 | HOT CUPPED END BIT RH | bit that is 1.25" thick, 13.125" wide and 21.625" in length. | 64.15 |
| Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 3G8316 | HOT CUPPED END BIT LH | bit that is 1.25" thick, 13.125" wide and 21.625" in length. | 64.15 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8317 | HOT CUPPED END BIT RH | end bit that is 1.25" thick, 13" wide and 21.625" in length. | 75.99 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8318 | HOT CUPPED END BIT LH | bit that is 1.25" thick, 13" wide and 21.625" in length. | 75.99 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 3G8319 | HOT CUPPED END BIT RH | bit that is 1" thick, 10.25" wide and 17.625" in length. | 39.68 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 3G8320 | HOT CUPPED END BIT LH | bit that is 1" thick, 10.25" wide and 17.625" in length. | 39.68 |
| Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8321 | HOT CUPPED END BIT RH | end bit that is 1" thick, 10" wide and 17.5" in length. | 38.58 |
| Item # | Item Name | Description | Wt. (lb.) |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 2C2302 | HOT CUPPED END BIT LH | bit that is 2" thick, 16" wide and 24" in length. | 155.00 |
| Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped | |||
| 2C2328 | HOT CUPPED END BIT RH | right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. | 36.00 |
| 2C2384 | LH END BIT | Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844LH | 74.96 |
| 2C2385 | RH END BIT | Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843RH | 74.96 |
| 2J2571 | RH END BIT | Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843 | 74.96 |
| 2J2572 | LH END BIT | Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844 | 74.96 |
| Caterpillar style bolt on right hand or left hand grader end bits for a 112 Caterpillar Grader. This is | |||
| 3B4757 | GRADER END BIT | a grader end bit that is .625" thick, 6" wide and 18.375" in length. | 16.75 |
| Caterpillar style bolt on end bit for a D4 or a D5 Caterpillar Bulldozer. This is a level cut right | |||
| 3G4285 | LEVEL CUT END BIT RH OR LH | hand or left hand end bit that is .75" thick, 8" wide and 16.75" in length. | 26.46 |
| Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1.375" | |||
| 3G6395 | END BIT RH OR LH | thick, 8" wide and 20.25" in length. | 56.44 |
| Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1" thick, | |||
| 3G6993 | END BIT RH OR LH | 6.25" wide and 13.5625" in length. | 22.05 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8277 | HOT CUPPED END BIT RH | end bit that is 1.625" thick, 13" wide and 22" in length. | 97.99 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8278 | HOT CUPPED END BIT LH | bit that is 1.625" thick, 13" wide and 22" in length. | 97.99 |
| Caterpillar style bolt on right hand end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right | |||
| 3G8279 | HOT CUPPED RH END BIT | 98.00 | |
| Caterpillar style bolt on left hand end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left | |||
| 3G8280 | HOT CUPPED LH END BIT | 98.00 | |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8281 | HOT CUPPED END BIT RH | end bit that is 1.625" thick, 16" wide and 27.5" in length. | 153.00 |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8282 | HOT CUPPED END BIT LH | bit that is 1.625" thick, 16" wide and 27.5" in length. | 153.00 |
| Caterpillar style right hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 | |||
| 3G8283 | RH END BIT | plow bolts and 9 - 100 hex nuts; Use Item # 8E4197 | 155.00 |
| Caterpillar style left hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 | |||
| 3G8284 | LH END BIT | plow bolts and 9 - 100 hex nuts; Use Item # 8E4196 | 155.00 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8285 | HOT CUPPED END BIT RH | end bit that is 1.625" thick, 13" wide and 21.625" in length. | 105.01 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8286 | HOT CUPPED END BIT LH | bit that is 1.625" thick, 13" wide and 21.625" in length. | 105.01 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8287 | HOT CUPPED END BIT RH | end bit that is 1.625" thick, 13" wide and 22" in length. | 105.01 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8288 | HOT CUPPED END BIT LH | bit that is 1.625" thick, 13" wide and 22" in length. | 105.01 |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8289 | HOT CUPPED END BIT RH | end bit that is 1.375" thick, 16" wide and 27.5" in length. | 128.00 |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8290 | HOT CUPPED END BIT LH | bit that is 1.375" thick, 16" wide and 27.5" in length. | 128.00 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8291 | HOT CUPPED END BIT RH | end bit that is 1.375" thick, 15.5" wide and 24" in length. | 103.99 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8292 | HOT CUPPED END BIT LH | bit that is 1.375" thick, 15.5" wide and 24" in length. | 103.99 |
| Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 3G8293 | HOT CUPPED END BIT RH | bit that is .875" thick, 13.125" wide and 21.625" in length. | 66.14 |
| Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 3G8294 | HOT CUPPED END BIT LH | bit that is .875" thick, 13.125" wide and 21.625" in length. | 66.14 |
| Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped | |||
| 3G8295 | HOT CUPPED END BIT RH | right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. | 36.00 |
| Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left | |||
| 3G8296 | HOT CUPPED END BIT LH | hand end bit that is 1" thick, 10.3" wide and 15.44" in length. | 36.00 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 3G8297 | HOT CUPPED END BIT RH | bit that is 1" thick, 10.375" wide and 15.75" in length. | 38.58 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 3G8298 | HOT CUPPED END BIT LH | bit that is 1" thick, 10.375" wide and 15.75" in length. | 38.58 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8299 | HOT CUPPED END BIT RH | end bit that is 1.25" thick, 13" wide and 21.625" in length. | 75.99 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8300 | HOT CUPPED END BIT LH | bit that is 1.25" thick, 13" wide and 21.625" in length. | 75.99 |
| Caterpillar style right hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - | |||
| 3G8301 | RH END BIT | 100x400 plow bolts and 9 - 100 hex nuts | 57.54 |
| Caterpillar style left hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - 100x400 | |||
| 3G8302 | LH END BIT | plow bolts and 9 - 100 hex nuts | 57.54 |
| Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 3G8315 | HOT CUPPED END BIT RH | bit that is 1.25" thick, 13.125" wide and 21.625" in length. | 64.15 |
| Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 3G8316 | HOT CUPPED END BIT LH | bit that is 1.25" thick, 13.125" wide and 21.625" in length. | 64.15 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8317 | HOT CUPPED END BIT RH | end bit that is 1.25" thick, 13" wide and 21.625" in length. | 75.99 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 3G8318 | HOT CUPPED END BIT LH | bit that is 1.25" thick, 13" wide and 21.625" in length. | 75.99 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 3G8319 | HOT CUPPED END BIT RH | bit that is 1" thick, 10.25" wide and 17.625" in length. | 39.68 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 3G8320 | HOT CUPPED END BIT LH | bit that is 1" thick, 10.25" wide and 17.625" in length. | 39.68 |
| Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 3G8321 | HOT CUPPED END BIT RH | end bit that is 1" thick, 10" wide and 17.5" in length. | 38.58 |
| Item # | Item Name | Description | Wt. (lb.) |
| Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 5J9628 | HOT CUPPED END BIT LH | bit that is .875" thick, 13.125" wide and 21.625" in length. | 66.14 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 6J0275 | HOT CUPPED END BIT RH | bit that is 1" thick, 10.25" wide and 17.625" in length. | 39.68 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 6J0276 | HOT CUPPED END BIT LH | bit that is 1" thick, 10.25" wide and 17.625" in length. | 39.68 |
| Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 6J0277 | HOT CUPPED END BIT RH | end bit that is 1" thick, 10" wide and 17.5" in length. | 38.58 |
| Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 6J0278 | HOT CUPPED END BIT LH | bit that is 1" thick, 10" wide and 17.5" in length. | 38.58 |
| Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped | |||
| 6J0893 | HOT CUPPED END BIT RH | right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. | 36.00 |
| Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left | |||
| 6J0894 | HOT CUPPED END BIT LH | hand end bit that is 1" thick, 10.3" wide and 15.44" in length. | 36.00 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 6J0895 | HOT CUPPED END BIT RH | bit that is 1" thick, 10.375" wide and 15.75" in length. | 38.58 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 6J0896 | HOT CUPPED END BIT LH | bit that is 1" thick, 10.375" wide and 15.75" in length. | 38.58 |
| Caterpillar style bolt on right hand level cut end bit for a D8 Bulldozer. This is a level cut end bit | |||
| 6Y4277 | RH END BIT | that is 1.5" thick, 13" wide and 23.3" in length. | 107.70 |
| Caterpillar style bolt on left hand level cut end bit for a D8 Bulldozer. This is a level cut end bit | |||
| 6Y4278 | LH END BIT | that is 1.5" thick, 13" wide and 23.3" in length. | 107.70 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 6Y4410 | HOT CUPPED END BIT LH | bit that is 1.25" thick, 12" wide and 19.5" in length. | 59.52 |
| Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 6Y4411 | HOT CUPPED END BIT RH | bit that is 1.25" thick, 12" wide and 19.5" in length. | 59.52 |
| Caterpillar style bolt on end bit for a D3, D4 and D5 Caterpillar Bulldozers. This is an angled right | |||
| 6Y5839 | ANGLED END BIT RH | hand end bit that is .63" thick, 6.5" wide and 13.88" in length. | 13.45 |
| Caterpillar style bolt on end bit for a D3, D4 and D5 Caterpillar Bulldozers. This is an angled left | |||
| 6Y5840 | ANGLED END BIT LH | hand end bit that is .63" thick, 6.5" wide and 13.88" in length. | 13.45 |
| Caterpillar style bolt on right hand or left hand grader end bits for a 112 Caterpillar Grader. This is | |||
| 7D2052 | GRADER END BIT | a grader end bit that is .625" thick, 6" wide and 18.375" in length. | 16.75 |
| Caterpillar style right hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 | |||
| 7J3463 | RH END BIT | plow bolts and 9 - 100 hex nuts; Use Item # 8E4197 | 155.00 |
| Caterpillar style left hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 | |||
| 7J3464 | LH END BIT | plow bolts and 9 - 100 hex nuts; Use Item # 8E4196 | 155.00 |
| Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 7T4096 | HOT CUPPED END BIT LH | bit that is 2 1/4" thick, 19" wide and 29" in length. | 280.00 |
| Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand | |||
| 7T4097 | HOT CUPPED END BIT RH | end bit that is 2 1/4" thick, 19" wide and 29" in length. | 280.00 |
| Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand | |||
| 7T4687 | HOT CUPPED END BIT RH | end bit that is 2" thick, 19" wide and 29" in length. | 255.00 |
| Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 7T4688 | HOT CUPPED END BIT LH | bit that is 2" thick, 19" wide and 29" in length. | 255.00 |
| 7T6587 | RH END BIT | Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843 | 74.96 |
| 7T6588 | LH END BIT | Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844 | 74.96 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 7T9089 | HOT CUPPED END BIT RH | bit that is 1.625" thick, 15.875" wide and 23.5" in length. | 127.87 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 7T9090 | HOT CUPPED END BIT LH | bit that is 1.625" thick, 15.875" wide and 23.5" in length. | 127.87 |
| Caterpillar style left hand end bit that takes 7 - 100x325 plow bolts and 7 - 100 hex nuts; Use Item | |||
| 7T9092 | LH END BIT | # 8E4538 | 164.00 |
| Caterpillar style right hand end bit that takes 7 - 100x325 plow bolts and 7 - 100 hex nuts; Use | |||
| 7T9093 | RH END BIT | Item # 8E4537 | 164.00 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 8E4193 | HOT CUPPED END BIT RH | bit that is 1.625" thick, 15.875" wide and 23.5" in length. | 127.87 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 8E4194 | HOT CUPPED END BIT LH | bit that is 1.625" thick, 15.875" wide and 23.5" in length. | 127.87 |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 8E4196 | HOT CUPPED END BIT LH | bit that is 2" thick, 16" wide and 24" in length. | 155.00 |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 8E4197 | HOT CUPPED END BIT RH | bit that is 2" thick, 16" wide and 24" in length. | 155.00 |
| Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 8E4198 | HOT CUPPED END BIT LH | bit that is 2" thick, 19" wide and 29" in length. | 255.00 |
| Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand | |||
| 8E4199 | HOT CUPPED END BIT RH | end bit that is 2" thick, 19" wide and 29" in length. | 255.00 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 8E4537 | HOT CUPPED END BIT RH | end bit that is 2" thick, 15.875" wide and 23.5" in length. | 169.00 |
| Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 8E4538 | HOT CUPPED END BIT LH | bit that is 2" thick, 15.875" wide and 23.5" in length. | 169.00 |
| 8E4539 | RH END BIT | Caterpillar style right hand end bit for D8-9 doziers | 158.00 |
| 8E4540 | LH END BIT | Caterpillar style left hand end bit for D8-9 doziers | 158.00 |
| Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand | |||
| 8E4541 | HOT CUPPED END BIT RH | end bit that is 2 1/4" thick, 19" wide and 29" in length. | 280.00 |
| 8E4541HDR | RH END BIT | Caterpillar style right hand ribbed end bit, takes 7 - 125 X 400 plow bolts and 7 - 125 hex nuts | 285.00 |
| Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 8E4542 | HOT CUPPED END BIT LH | bit that is 2 1/4" thick, 19" wide and 29" in length. | 280.00 |
| 8E4542HDL | LH END BIT | Caterpillar style left hand ribbed end bit, takes 7 - 125 X 400 plow bolts and 7 - 125 hex nuts | 285.00 |
| Caterpillar style right hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" | |||
| 8E4545 | RH END BIT | thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts | 259.00 |
| Caterpillar style left hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" | |||
| 8E4546 | LH END BIT | thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts | 259.00 |
| Item # | Item Name | Description | Wt. (lb.) |
| Caterpillar style bolt on right hand or left hand grader end bits for a 14G Caterpillar Grader. This | |||
| 8E5529 | END BIT | is a grader end bit that is .625" thick, 6" wide and 18.25" in length. | 18.00 |
| Caterpillar style bolt on right hand or left hand grader end bits for a 16G Caterpillar Grader. This | |||
| 8E5530 | END BIT | 18.00 | |
| Caterpillar style bolt on right hand or left hand grader end bits for a 12G Caterpillar Grader. This | |||
| 8E5531 | GRADER END BIT RH/LH | is a grader end bit that is .625" thick, 6" wide and 18.375" in length. | 16.76 |
| Caterpillar style bolt on level cut end RH end bit for a D5 Caterpillar Bulldozer. This is .75" thick, | |||
| 8" wide and 17.875" in length. It takes 4 of a 3/4" X 2 3/4" (750X275) plow bolt and 4 of a 3/4" | |||
| 8E7078 | LEVEL CUT END BIT RH | (750 HEX NUT) hex nut. | 26.00 |
| Caterpillar style bolt on level cut end LH end bit for a D5 Caterpillar Bulldozer. This is .75" thick, | |||
| 8E7079 | LEVEL CUT END BIT LH | 8" wide and 17.875" in length. | 26.00 |
| Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut left hand end bit | |||
| 8E9378 | LEVEL CUT END BIT LH | that is 1" thick, 8" wide and 18.50" in length. | 36.16 |
| Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut right hand end bit | |||
| 8E9379 | LEVEL CUT END BIT RH | that is 1" thick, 8" wide and 18.50" in length. | 36.16 |
| Caterpillar style bolt on end bit for a D3 Caterpillar Bulldozer. This is a level cut right hand or left | |||
| 8J6412 | LEVEL CUT END BIT RH OR LH | hand end bit that is .75" thick, 6.5" wide and 13" in length. | 15.87 |
| Caterpillar style left hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - 100x400 | |||
| 8J8116 | LH END BIT | plow bolts and 9 - 100 hex nuts; Use Item # 3G8302 | 57.54 |
| Caterpillar style right hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - | |||
| 8J8117 | RH END BIT | 100x400 plow bolts and 9 - 100 hex nuts; Use Item # 3G8301 | 57.54 |
| Caterpillar style right hand end bit that is 18 7/8" long, 10" wide, and 1 1/8" thick; takes 9 - | |||
| 9J1477 | RH END BIT | 100x300 plow bolts and 9 - 100 hex nuts | 57.31 |
| Caterpillar style left hand end bit that is 18 7/8" long. 10" wide, and 1 1/8" thick; takes 9 - 100x300 | |||
| 9J1478 | LH END BIT | plow bolts and 9 - 100 hex nuts | 57.31 |
| Caterpillar style bolt on right hand or left hand grader end bits for a 12G Caterpillar Grader. This | |||
| 9W1764 | GRADER END BIT RH/LH | is a grader end bit that is .625" thick, 6" wide and 18.375" in length. | 16.76 |
| Caterpillar style right hand end bit that is 18 1/4" long, 8 1/2" wide and 1 1/8" thick; takes 8 - | |||
| 9W1875 | RH END BIT | 750x300 plow bolts and 8 - 750 hex nuts | 56.44 |
| Caterpillar style left hand end bit that is 18 1/4" long, 8 1/2" wide and 1 1/8" thick; takes 8 - | |||
| 9W1876 | LH END BIT | 750x300 plow bolts and 8 - 750 hex nuts | 56.44 |
| Caterpillar style right hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" | |||
| 9W4491 | RH END BIT | thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts; Use Item # 8E4545 | 259.00 |
| Caterpillar style left hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" | |||
| 9W4492 | LH END BIT | thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts; Use Item # 8E4546 | 259.00 |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped right hand end | |||
| 9W6192 | HOT CUPPED END BIT RH | bit that is 2" thick, 16" wide and 24" in length. | 155.00 |
| Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 9W6193 | HOT CUPPED END BIT LH | bit that is 2" thick, 16" wide and 24" in length. | 155.00 |
| 9W6194 | LH END BIT | Caterpillar style left hand end bit for D8-9 doziers; Use Item # 8E4540 | 158.00 |
| 9W6195 | RH END BIT | Caterpillar style right hand end bit for D8-9 doziers; Use Item # 8E4539 | 158.00 |
| Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand | |||
| 9W6196 | HOT CUPPED END BIT RH | end bit that is 2" thick, 19" wide and 29" in length. | 255.00 |
| Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end | |||
| 9W6197 | HOT CUPPED END BIT LH | bit that is 2" thick, 19" wide and 29" in length. | 255.00 |
| Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozers. This is a hot cupped left hand end | |||
| 9W6198 | HOT CUPPED END BIT LH | bit that is 1 3/8" thick, 13" wide and 24" in length. | 111.33 |
| Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozers. This is a hot cupped right hand | |||
| 9W6199 | HOT CUPPED END BIT RH | end bit that is 1 3/8" thick, 13" wide and 24" in length. | 111.33 |
| Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut right hand end bit | |||
| 9W8874 | LEVEL CUT END BIT RH | that is 1" thick, 10" wide and 18.375" in length. | 44.09 |
| Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut left hand end bit | |||
| 9W8875 | LEVEL CUT END BIT LH | that is 1" thick, 10" wide and 18.375" in length. | 44.09 |
| Caterpillar Style Grader Blades | |||
| 138-6440 | GRADER BLADE | 360.00 | |
| Caterpillar style bolt on right hand grader overlay for a 120 Caterpillar Grader. This is a double | |||
| 4D5757 | RH GRADER OVERLAY | beveled reversible bucket overlay blade that is .625" thick, 9" wide and 18.875" in length. | 30.86 |
| Caterpillar style bolt on left hand grader overlay for a 120 Caterpillar Grader. This is a double | |||
| 4D5758 | LH GRADER OVERLAY | beveled reversible bucket overlay blade that is .625" thick, 9" wide and 18.875" in length. | 30.86 |
| Caterpillar style 5/8" x 8" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" | |||
| 4D9922 | GRADER BLADE | plow bolts and 15 - 5/8" hex nuts; Use Item # 5D-9561 | 107.58 |
| Caterpillar style 1" X 8" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 3/4" X 2 | |||
| 4T2231 | CURVED GRADER BLADE | 3/4"(750X275) plow bolt and 13 of a 3/4"(750 HEX NUT) hex nut. | 153.00 |
| Caterpillar style 1" X 8" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 | |||
| 4T2233 | CURVED GRADER BLADE | 3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. | 175.00 |
| Caterpillar style 1" X 8" X 8" curved, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 | |||
| 4T2236 | CURVED GRADER BLADE | 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. | 196.00 |
| Caterpillar style 1" X 8" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 5/8" X 2 | |||
| 4T2242 | CURVED GRADER BLADE | 3/4"(625X275) plow bolt and 15 of a 5/8"(625 HEX NUT) hex nut. | 179.00 |
| Caterpillar style 1" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 | |||
| 4T2243 | GRADER BLADE | 3/4"(625X275) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. Use Item # 7T3499 | 153.00 |
| Caterpillar style 1" X 8" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 | |||
| 4T2244 | GRADER BLADE | 3/4"(625X275) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. | 155.00 |
| Caterpillar style 3/4" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 | |||
| 4T3007 | GRADER BLADE | 1/4"(625X225) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. | 112.44 |
| Caterpillar style 3/4" X 8" X 7" flat, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 | |||
| 4T3032 | GRADER BLADE | 3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. | 132.28 |
| Caterpillar style 3/4" X 8" X 7" flat, heat treated, 15 hole grader blade; takes 15 of a 5/8" X 2 | |||
| 4T3036 | GRADER BLADE | 1/4"(625X225) plow bolt and 15 of a 5/8"(625 HEX NUT) hex nut. | 132.28 |
| Item # | Item Name | Description | Wt. (lb.) |
| Caterpillar style 3/4" X 8" X 8" flat, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 | |||
| 4T3037 | FLAT GRADER BLADE | 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. | 132.28 |
| Caterpillar style 1" X 10" X 96" flat, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 | |||
| 4T6511 | FLAT GRADER BLADE | 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. | 248.00 |
| Caterpillar style 1.375" X 10" X 95.813" flat, heat treated, 17 hole grader blade; takes 17 of a 3/4" | |||
| 4T8317 | FLAT GRADER BLADE | X 2 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. | 354.00 |
| Caterpillar style 5/8" x 6" x 6' curved, heat treated, 13 hole grader blade; takes 13 - 5/8" x 2 3/4" | |||
| 5D-9553 | GRADER BLADE | plow bolts and 13 - 5/8" hex nuts | 66.13 |
| Caterpillar style 5/8" x 6" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" | |||
| 5D-9554 | GRADER BLADE | plow bolts and 15 - 5/8" hex nuts | 78.26 |
| Caterpillar style .75" X 6" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 | |||
| 5D-9557 | GRADER BLADE | 1/4"(750X225) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. | 91.01 |
| Caterpillar style 3/4" x 8" x 6' curved, heat treated, 13 hole grader blade; takes 13 - 3/4" x 2 3/4" | |||
| 5D-9558 | GRADER BLADE | plow bolts and 13 - 3/4" hex nuts | 112.43 |
| Caterpillar style 3/4" x 8" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" | |||
| 5D-9559 | GRADER BLADE | plow bolts and 15 - 625 hex nuts | 131.17 |
| Caterpillar style 5/8" x 8" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" | |||
| 5D-9561 | GRADER BLADE | plow bolts and 15 - 5/8" hex nuts | 107.58 |
| Caterpillar style .625" X 8" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 | |||
| 5D-9562 | GRADER BLADE | 1/4"(625X225) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. | 91.01 |
| Caterpillar style 3/4" x 6" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" | |||
| 5D9557 | GRADER BLADE | plow bolts and 15 - 625 hex nuts | 92.00 |
| Caterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is | |||
| 5D-9732 | GRADER BLADE | 146.00 | |
| Caterpillar style 3/4" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 | |||
| 5J6970 | GRADER BLADE | 1/4"(625X225) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. Use Item # 4T3007 | 112.44 |
| Caterpillar style 3/4" X 8" X 7" flat, heat treated, 15 hole grader blade; takes 15 of a 5/8" X 2 | |||
| 5J6973 | GRADER BLADE | 1/4"(625X225) plow bolt and 15 of a 5/8"(625 HEX NUT) hex nut. Use Item # 4T3036 | 132.28 |
| Caterpillar style 3/4" X 8" X 7" flat, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 | |||
| 6J2377 | GRADER BLADE | 3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. Use Item # 4T3032 | 132.28 |
| Caterpillar style bolt on left hand or right hand grader overlay for a 14G Caterpillar Grader. This is | |||
| 6Y2805 | LH/RH GRADER OVERLAY | length. | |
| Caterpillar style 5/8" X 8" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 | |||
| 7D1158 | GRADER BLADE | 3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. | 108.91 |
| 7D1576 | GRADER BLADE | 111.00 | |
| Caterpillar style 3/4" X 8" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 | |||
| 7D1577 | GRADER BLADE | 3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. | 132.28 |
| Caterpillar style 3/4" X 8" X 8" curved, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 | |||
| 7D1949 | CURVED GRADER BLADE | 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. | 139.99 |
| 7D4508 | GRADER BLADE | 54.00 | |
| Caterpillar style bolt on right hand or left hand grader overlay for a 14G Caterpillar Grader. This is | |||
| a double beveled reversible bucket overlay blade that is .625" thick, 9.25" wide and 23.375" in | |||
| 7D9999 | GRADER OVERLAY | length. | 35.27 |
| Caterpillar style 3/4" x 8" x 7' curved, carbon, 15 hole grader blade; takes 15 - 3/4" x 2 3/4" plow | |||
| 7T-1623 | GRADER BLADE | bolts and 15 - 3/4" hex nuts | 132.28 |
| Caterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is | |||
| 7T-1631 | GRADER BLADE | 122.00 | |
| Caterpillar style 5/8" x 6" x 8' curved, carbon, 17 hole grader blade; takes 17 - 5/8" x 2 3/4" plow | |||
| 7T-1632 | GRADER BLADE | bolts and 17 - 5/8" hex nuts | 91.05 |
| Caterpillar style 5/8" x 6" x 6' curved, carbon, 13 hole grader blade; takes 13 - 5/8" x 2 3/4" plow | |||
| 7T-1633 | GRADER BLADE | bolts and 13 - 5/8" hex nuts | 65.47 |
| Caterpillar style 3/4" x 8" x 6' curved, carbon, 13 hole grader blade; takes 13 - 3/4" x 2 3/4" plow | |||
| 7T-1634 | GRADER BLADE | bolts and 13 - 3/4" hex nuts | 113.09 |
| Caterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is | |||
| 7T-1637 | GRADER BLADE | 64.40 | |
| Caterpillar style 5/8" x 8" x 7' curved, carbon, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" plow | |||
| 7T-1643 | GRADER BLADE | bolts and 15 - 5/8" hex nuts | 108.24 |
| Caterpillar style 5/8" x 6" x 7' curved, carbon, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" plow | |||
| 7T-1645 | GRADER BLADE | bolts and 15 - 5/8" hex nuts | 79.59 |
| 7T3498 | GRADER BLADE | 178.00 | |
| Caterpillar style 1" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 | |||
| 7T3499 | GRADER BLADE | 3/4"(625X275) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. | 153.00 |
| 8D2786 | GRADER BLADE | 52.00 | |
| Caterpillar style 1/2" x 6" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" | |||
| 8D-2787 | GRADER BLADE | plow bolts and 15 - 5/8" hex nuts | 62.16 |
| Caterpillar style 5/8" x 6" x 8' curved, heat treated, 17 hole grader blade; takes 17 - 5/8" x 2 3/4" | |||
| 8J-4043 | GRADER BLADE | plow bolts and 17 - 5/8" hex nuts | 91.05 |
| Caterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is | |||
| 8J9821 | GRADER BLADE | 122.00 | |
| Caterpillar style .625" X 6" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 3/4" X 2 | |||
| 9J3657 | CURVED GRADER BLADE | 1/4"(750X225) plow bolt and 13 of a 3/4"(750 HEX NUT) hex nut. | 64.99 |
| Caterpillar style 5/8" X 6" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 | |||
| 9J3658 | CURVED GRADER BLADE | 3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. | 73.39 |
| Caterpillar style bolt on right hand grader end bit for a 14G Caterpillar Grader. This is a grader | |||
| 9J4405 | RH END BIT | 18.08 | |
| Caterpillar style bolt on left hand grader end bit for a 14G Caterpillar Grader. This is a grader end | |||
| 9J4406 | LH END BIT | 18.08 | |
| Item # | Item Name | Description | Wt. (lb.) |
| Caterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is | |||
| 9J7701 | GRADER BLADE | 92.00 | |
| Caterpillar style 1/2" x 6" x 7' curved, carbon, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" plow | |||
| 9W-2299 | GRADER BLADE | bolts and 15 - 5/8" hex nuts | 61.65 |
| Caterpillar style bolt on left hand and right hand grader overlay for a 140 Caterpillar Grader. This | |||
| is a double beveled reversible bucket overlay blade that is .625" thick, 9.25" wide and 18.625" in | |||
| 9W1767 | LH/RH GRADER OVERLAY | length. | 28.99 |
| Caterpillar style bolt on left hand or right hand grader overlay for a 12G Caterpillar Grader. This is | |||
| 9W1768 | LH/RH GRADER OVERLAY | length. | 34.00 |
| T74753 | GRADER BLADE | 65.00 | |
| Caterpillar Style Guards & Protectors | |||
| 112-2489 | PROTECTOR | Caterpillar style vertical shroud protector, takes 2 - 112-2490 pins and 2 - 8E5559 retainers | 37.92 |
| Caterpillar style vertical shroud protector with a 3" opening, it is 40" long and has a 24" bolt hole | |||
| 125-0800 | PROTECTOR | spacing, center to center; takes 2 - 8E4708 pins and 2 - 4T4707 retainers | 126.77 |
| 132-1014 | EXTENDED GUARD | Caterpillar style extended ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers | 172.00 |
| 132-1015 | PROTECTOR | Caterpillar style protector; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers | 177.00 |
| 132-4716EXT | RIPPER GUARD | Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers | 52.56 |
| Caterpillar style protector for a 980G with a 9 1/2" bolt hole spacing; it is 18 1/4" long and is for a | |||
| 135-8246 | PROTECTOR | 1 1/8" lip thickness; takes a 135-9292 pin and an 8E6359 sleeved retainer | 23.31 |
| Caterpillar style right hand corner protector for a J250 series, takes 2 - 100x300 plow bolts and 2 - | |||
| 173-5422 | RH CORNER PROTECTOR | 100 hex nuts; Use Item #253-0060 | 21.90 |
| Caterpillar style left hand corner protector for a J250 series, takes 2 - 100x300 plow bolts and 2 - | |||
| 173-5423 | LH CORNER PROTECTOR | 100 hex nuts; Use Item # 253-0061 | 21.90 |
| Caterpillar style right hand corner protector for a J300 series, takes 2 - 125x375 plow bolts and 2 - | |||
| 173-5424 | RH CORNER PROTECTOR | 125 hex nuts; Use Item # 253-0062 | 29.10 |
| Caterpillar style left hand corner protector for a J300 series, takes 2 - 125x375 plow bolts and 2 - | |||
| 173-5425 | LH CORNER PROTECTOR | 125 hex nuts; Use Item # 253-0063 | 29.10 |
| Caterpillar style right hand corner protector for a J350 series, takes 2 - 125x375 plow bolts and 2 - | |||
| 173-5426 | RH CORNER PROTECTOR | 125 hex nuts; Use Item # 253-0064 | 36.30 |
| Caterpillar style left hand corner protector for a J350 series, takes 2 - 125x375 plow bolts and 2 - | |||
| 173-5427 | LH CORNER PROTECTOR | 125 hex nuts; Use Item # 253-0065 | 36.30 |
| Caterpillar style right hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x | |||
| 173-5428 | RH CORNER PROTECTOR | 400 plow bolts and 2 - 125 hex nuts; Use Item # 253-0066 | 64.70 |
| Caterpillar style left hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x 400 | |||
| 173-5429 | LH CORNER PROTECTOR | plow bolts and 2 - 125 hex nuts; Use Item # 253-0067 | 64.70 |
| Caterpillar style guard with a 2 1/2" opening and is 23" long, takes 2 - 1U0739 pins and 2 - | |||
| 1U0740 | GUARD | 8E5559 sleeved retainers | 51.15 |
| 1U3644 | GUARD | Caterpillar style ripper guard; takes a 6Y3909 pin and a 4T4707 retainer | 88.85 |
| Caterpillar style right hand, heavy duty, corner protector for a J250 series, takes 2 - 100 x 300 | |||
| 253-0060 | RH CORNER PROTECTOR | plow bolts and 2 - 100 hex nuts (for 916-943 models) | 21.90 |
| Caterpillar style left hand, heavy duty, corner protector for a J250 series, takes 2 - 100 x 300 plow | |||
| 253-0061 | LH CORNER PROTECTOR | bolts and 2 - 100 hex nuts (for 916-943 models) | 21.90 |
| Caterpillar style right hand, heavy duty, corner protector for a J300 series, takes 2 - 125 x 350 | |||
| 253-0062 | RH CORNER PROTECTOR | plow bolts and 2 - 125 hex nuts (for 950-963 models) | 29.10 |
| Caterpillar style left hand, heavy duty, corner protector for a J300 series, takes 2 - 125 x 350 plow | |||
| 253-0063 | LH CORNER PROTECTOR | bolts and 2 - 125 hex nuts (for 950-963 models) | 29.10 |
| Caterpillar style right hand, heavy duty, corner protector for a J350 series, takes 2 - 125 x 375 | |||
| 253-0064 | RH CORNER PROTECTOR | plow bolts and 2 - 125 hex nuts (for 966-973 models) | 36.30 |
| Caterpillar style left hand, heavy duty, corner protector for a J350 series, takes 2 - 125 x 375 plow | |||
| 253-0065 | LH CORNER PROTECTOR | bolts and 2 - 125 hex nuts (for 966-973 models) | 36.30 |
| Caterpillar style right hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x | |||
| 253-0066 | RH CORNER PROTECTOR | 400 plow bolts and 2 - 125 hex nuts (for 980-988 models) | 64.70 |
| Caterpillar style left hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x 400 | |||
| 253-0067 | LH CORNER PROTECTOR | plow bolts and 2 - 125 hex nuts (for 980-988 models) | 64.70 |
| 6I8310 | LH CORNER PROTECTOR | Caterpillar style left hand corner protector for a J300 series | 13.45 |
| 6I8311 | RH CORNER PROTECTOR | Caterpillar style right hand corner protector for a J300 series | 13.45 |
| 6J8814 | GUARD | Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers | 31.09 |
| 6Y8960 | GUARD | Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers | 85.98 |
| 6Y9704 | GUARD | Caterpillar style shank guard | 117.39 |
| 7J1849 | GUARD | Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers; Use Item # 6J8814 | 31.09 |
| 8E1848 | RIPPER GUARD | Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers | 51.81 |
| 8E1848EXT | EXTENDED GUARD | Caterpillar style extended ripper guard, takes 2 - 6Y3909 pins | 57.98 |
| Caterpillar style vertical protector; takes 2 - 8E4708 pins and 2 - 4T4707 retainers; Use Item #125- | |||
| 8E3414 | PROTECTOR | 0800 | 126.77 |
| Caterpillar style vertical protector; takes 2 - 8E4708 pins and 2 - 4T4707 retainers; Use Item # | |||
| 8E3814 | PROTECTOR | 125-0800 | 126.77 |
| 8E5300 | RH CORNER PROTECTOR | Caterpillar style right hand corner protector for a J300 series | 15.21 |
| 8E5301 | LH CORNER PROTECTOR | Caterpillar style left hand corner protector for a J300 series | 15.21 |
| Caterpillar style protector with a 1 1/2" opening, it is 26" long and has a 14 1/2" bolt hole spacing, | |||
| 8J4143 | PROTECTOR | center to center; takes 2 - 9J8441 pins and 2 - 8E5559 sleeved retainers | 45.08 |
| Caterpillar style side protector with a 1 1/2" opening, it is 23" long and has a 10" bolt hole | |||
| 9J9600 | PROTECTOR | spacing, center to center; takes 2 - 9J8442 pins and 2 - 6Y9459 retainers | 39.68 |
| 9N4621 | GUARD | Caterpillar style ripper guard; takes 2 - 8E2229 pins and 2 - 8E2230 retainers | 174.00 |
| 9W1820 | GUARD | Caterpillar style ripper guard; takes 2 - 8E2229 pins and 2 - 8E2230 retainers; Use Item # 9N4621 | 174.00 |
| 9W8365 | GUARD | Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers | 90.61 |
| 9W8365EXT | EXTENDED GUARD | Caterpillar style extended ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers | 103.84 |
Explore Our Products Across Various Industries
Metal and Waste Shredders
